Aviation & Aerospace - Airpower 2024 - Aircraft by Country - Aircraft Manufacturers Vehicles & Artillery - Armor 2024 - Armor by Country - Armor Manufacturers Infantry Small Arms - Warfighter 2024 - Small Arms by Country - Arms Manufacturers Warships & Submarines - Navies 2024 - Ships by Country - Shipbuilders U.S. Military Pay 2024 Military Ranks Special Forces by Country

MP38 (Maschinenpistole 38)

Submachine Gun (SMG)

Nazi Germany | 1938

"The MP38 submachine gun set the mold for future submachine gun designs to follow."

Authored By: Staff Writer | Last Edited: 08/18/2018 | Content ©www.MilitaryFactory.com | The following text is exclusive to this site; No A.I. was used in the generation of this content.
The MP38 served as the predecessor to the well known MP40 series of mass-produced submachine guns developed by the Germans in World War 2. The type was revolutionary principally in its construction which broke from the practiced norms of the time. However, the MP38 was eventually deemed too expensive to produce in the large numbers required for the German Army, resulting in the creation of its simplified sister design - the MP40 of 1940 - which utilized steel pressings and welds while keeping machining to a minimum.

The submachine gun had gained steam in the interwar years following World War 1 as an interim firearm for use by general infantry, special forces and vehicle crews requiring self-defense. Submachine guns could be fired from the confines of a tank and even a non-combat detachment could arm themselves when traversing across hostile territory. For special forces groups or special units such as paratroopers, the submachine gun was portable and suitable for Close-Quarters Battle (CQB) and, with general infantry, it served well alongside established rifle units and machine gun elements in nearly any environment. In any case, the submachine gun remains just as important to the modern army today as it did in World War 2.

Development of the MP38 originated from an Oberkommando der Wehrmacht requirement for a submachine gun to stock the inventory of the fast-moving German Army. The German Army was fine-tuning the concept of Blitzkrieg to prove the value of fast-moving mechanized forces operating in conjunction with air support. The construction process of the new MP38 called upon sheet metal stampings and die-casting while incorporating use of plastics in the furniture instead of wood. A folding bare metal butt made the design and allowed for maximum portability during marches and maximum stability when firing. Upon completing the requisite trials, the MP38 entered production in 1938 out of the Erfurter Maschinenfabrik B. Geipel GmbH (Erma-Werke) facility at Erfurt.

Overall, the MP38 featured a running length of 32.75 inches with the butt fully extended and a length of 24.76 inches with the butt fully collapsed - a savings of nearly 8 inches. The butt looped downwards to collapse along the underside of the gun body along a two-point pivoting assembly at the rear of the receiver. This feature was taken from the preceding 9mm MP "Erma" submachine gun design which was the first such firearm to sport this space-saving quality. The receiver contained all of the critical internal working components including the recoil spring (housed within a telescoping casing) running half the length of the weapon. In essence, the magazine feed coupled with a spring-loaded magazine simply served to set the next available round ahead of the firing pin in the firing chamber in automatic fashion. The barrel measured 9.72 inches in length and unloaded weight of the gun system was just over 9lbs. The MP38 was fed from a 32-round, single column detachable box magazine which, while serving as a forward vertical handgrip, also served to give the MP38 submachine gun (and its future kin) its unique profile. The weapon was chambered for the 9mm Parabellum cartridge. The receiver was very industrial in its display with the cocking handle set to the left side of the body. The barrel protruded ahead a short distance from the body and fore (tunnel) and aft sights were noted. Under the barrel there appeared a "lip", or "resting bar", designed to latch onto the sides of vehicle walls to help support the barrel-end of the weapon when firing and keep the recoil from driving the weapon back inside the vehicle's fighting compartment. A "cooling fin" was machined under the barrel length to help dissipate heat. The curved trigger unit sat within a strong oblong ring which was attached to the angled pistol grip, the latter made from Balkelite plastic to save on weight and steel use - a first for a submachine gun. Despite its somewhat distinct design, the internal workings of the MP38 were rather conventional, the firing operation making use of the blowback principle with a bolt. There was no built-in safety mode selector and firing was only limited to full-automatic, requiring a firm, two-handed hold.

Once in practice during the Polish Campaign of 1939, the MP38 soon shown limitations - some even lethal to its owners. Chiefly, her manufacturing process was rather inefficient considering the requirement for steel in wartime Germany leading German authorities to request a cheaper mass-production model following the same design form - this became the famous MP40 series. The two guns were differentiated visibly by the MP38's corrugated steel receiver exterior, machined grip and a perforation to the magazine housing. Another drawback in the MP submachine gun family line was the single-column feed mechanism which proved prone to jamming. Still another fault lay in the bolt assembly that, when cocked and the weapon accidentally knocked, could cause the bolt to move forward, initiating the firing process and allowing the weapon to fire on its own. To solve this unintentional firing issue, a safety catch was instituted into the design and MP38s modified in this way became known by the designation of "MP38/40". MP38s were typically issued to Non-Commissioned Officers of the German Army governing machine gun emplacements allowing them to fight on at shorter ranges than their machine guns would allow.

The MP38 submachine gun is often referred to as the "Schmeisser" after engineer Hugo Schmeisser though he had nil to do with the development of the MP38, making his association with the firearm technically incorrect - the MP38's design is actually formally attributed to Heinrich Vollmer. Regardless, the Allies knew the weapon as the "Schmeisser". Even Allied soldiers appreciated the MP series enough to acquire them and use them against their former owners when possible. As can be expected, the MP series also proved a favorite among various partisan groups.

Content ©MilitaryFactory.com; No Reproduction Permitted.
The physical qualities of the MP38 (Maschinenpistole 38). Information presented is strictly for general reference and should not be misconstrued as useful for hardware restoration or operation.
832 mm
32.76 in
O/A Length
247 mm
9.72 in
Barrel Length
9.13 lb
4.14 kg
Blowback; Full-Automatic Only
9mm Parabellum
32-round detachable box magazine
Front Tunnel and Rear
Performance specifications presented assume optimal operating conditions for the MP38 (Maschinenpistole 38). Information presented is strictly for general reference and should not be misconstrued as useful for hardware restoration or operation.
1,250 ft/sec
381 m/sec
Muzzle Velocity
Notable series variants as part of the MP38 (Maschinenpistole 38) Submachine Gun (SMG) family line.
MP38 - Base Series Designation
MP38/40 - Safety Catch installed to prevent unintended fire.
MP40 - Simplified production variant
Global customers who have evaluated and/or operated the MP38 (Maschinenpistole 38). Nations are displayed by flag, each linked to their respective national small arms listing.

Contractor(s): Erma-Werke - Nazi Germany
National flag of Austria National flag of Bulgaria National flag of Denmark National flag of Finland National flag of modern Germany National flag of Nazi Germany National flag of Greece National flag of Hungary National flag of Indonesia National flag of Malaysia National flag of the Netherlands National flag of Norway National flag of the Philippines National flag of Poland National flag of Romania National flag of the Soviet Union National flag of Spain National flag of the United States National flag of Vietnam National flag of Yugoslavia

[ Austria; Bulgaria; Denmark; Finland; Greece; Indonesia; Hungary; Malaysia; Netherlands; Nazi Germany; Norway; Romania; Philippines; Poland; Spain; United States; West Germany; Yugoslavia; North Vietnam; Soviet Union ]
1 / 1
Image of the MP38 (Maschinenpistole 38)
Left side view of the MP38 submachine gun

Design Qualities
Some designs are single-minded in their approach while others offer a more versatile solution to requirements.
Some designs stand the test of time while others are doomed to never advance beyond the drawing board; let history be their judge.
Going Further...
The MP38 (Maschinenpistole 38) Submachine Gun (SMG) appears in the following collections:
Disclaimer | Privacy Policy | Cookies

2024 Military Pay Scale Military Ranks U.S. DoD Dictionary Conversion Calculators Military Alphabet Code Military Map Symbols US 5-Star Generals WW2 Weapons by Country

The "Military Factory" name and MilitaryFactory.com logo are registered ® U.S. trademarks protected by all applicable domestic and international intellectual property laws. All written content, illustrations, and photography are unique to this website (unless where indicated) and not for reuse/reproduction in any form. Material presented throughout this website is for historical and entertainment value only and should not to be construed as usable for hardware restoration, maintenance, or general operation. We do not sell any of the items showcased on this site. Please direct all other inquiries to militaryfactory AT gmail.com. No A.I. was used in the generation of this content.

Part of a network of sites that includes Global Firepower, WDMMA.org, WDMMW.org, and World War Next.

©2024 www.MilitaryFactory.com • All Rights Reserved • Content ©2003-2024 (21yrs)