Aircraft / Aviation Vehicles & Artillery Small Arms Warships & Submarines Military Ranks Military Pay Chart (2024) Special Forces
Infantry Small Arms / The Warfighter

PA3(DM) / FMK-3 Mod 2

Submachine Gun (SMG) [ 1974 ]

The Argentine PA3(DM) / FMK series of SMGs replaced the aging PA2(DM) models that were based on the American M3A1 Grease Gun of WW2.

Authored By: Dan Alex | Last Edited: 07/01/2018 | Content ©www.MilitaryFactory.com | The following text is exclusive to this site.

The PA3(DM) / FMK-3 submachine gun series was of indigenous Argentine design and chambered for the universally accepted 9x19 Parabellum cartridge. The series was brought online to replace the aged PAM 1 / PAM 2 (later to become the PA1(DM) and PA2(DM) respectively) series of submachine guns then in service with Argentine military forces - these weapons being nothing more than locally-produced Argentine copies of the famous American M3A1 "Grease Gun" made popular during the war years of World War 2.

As expected, the Argentines took to modifying the original design to meet their own requirements which introduced the M3A1 in a 9mm form with a lighter overall operating weight and shorter overall operating design length - in effect making for a more compact and accurate weapon system. Argentine factories undertook production of this robust and cheap-to-manufacture weapon throughout the 1950s and 1960s while garnering priceless experience in their design, production and operation. Ultimately development work began in the late 1960s on a new indigenous effort to overtake the M3A1-inspired clones, these becoming known as the "PA3(DM)", modeled largely after the uber-successful Israeli Uzi submachine gun family. The PA3(DM) entered production in 1970 and manufacture spanned into 1978 to which some 15,000 examples were delivered by Fabrica Militar de Armas Portatiles "Domingo Matheu" of Rosaria, Sante Fe, Argentina. Again, the cartridge of choice became the 9x19mm Parabellum round.

The PA3(DM) ("DM" signifying the "Domingo Matheu" factory) was released in two distinct production forms differentiated by their plastic fixed buttstock or wire-type collapsible butt, each differing only in the slightest ways but were more or less identical weapons. The latter fell under the designation of "FMK-3 Mod 2" to follow with revised Argentine military nomenclature upon its inception. The collapsible wireframe butt simply slid forward into two loops found on either side of the receiver.

The PA3(DM)/FMK-3 family featured a weight of about 7lbs, 8 ounces as well as an overall extended length of approximately 27 inches, 20.5 inches when the stock was collapsed (wire butt form). The barrel was 11.4 inches in length and sported six grooves with a right-hand twist fabrication. The outward design of the weapon consisted largely of the rectangular receiver with a straight pistol grip set at about the center of the body. Overall construction of the receiver was largely pressed metal. The trigger, curved and surrounded by an oblong wire ring, was held just forward of the grip with the straight detachable box magazines (of 25- or 40-cartridge counts) inserted into the base of the pistol grip. The rear of the receiver could lay flat upon the firer's arm allowing for single-handed firing (albeit at reduced accuracy), additionally supported by the extended wire frame stock or fixed plastic buttstock. The forward underside portion of the receiver was protected over in a plastic foregrip to allow for firm two-hand holds. The barrel protruded a short distance away from the gun body and sights were noted along the top of the receiver. A unique safety mechanism was built into the rear of the pistol grip and a firing selector was located above the grip along the left side of the body. Firing modes included safety, single-shot and full-automatic fire. Cocking was accomplished by way of a handle found on the forward left side of the gun body. Operation was of blowback with a wraparound bolt design - these design elements borrowed from the Israeli Uzi. Muzzle velocity was 1,300 feet per second for the PA3(DM) and 1,312 feet per second for the FMK-3 Mod 2.

The FMK-5 was another FMK-inspired weapon and simply based on the FMK-3 but categorized as a "carbine" assault weapon. It still chambered the ubiquitous 9x19mm Parabellum cartridge but also added a semi-automatic firing mode, eliminating the full-automatic fire mode option of the submachine gun form.©MilitaryFactory.com
Note: The above text is EXCLUSIVE to the site www.MilitaryFactory.com. It is the product of many hours of research and work made possible with the help of contributors, veterans, insiders, and topic specialists. If you happen upon this text anywhere else on the internet or in print, please let us know at MilitaryFactory AT gmail DOT com so that we may take appropriate action against the offender / offending site and continue to protect this original work.


Basics [+]
Fabrica Militar de Armas Portatiles Domingo Matheu - Argentina
Argentina National flag of Argentina
Service Year
National Origin

Overall Length
693 mm / 27.28 in
Barrel Length
290 mm / 11.42 in
Weight (Empty)
7.50 lb / 3.40 kg
Gas pressure from the rearward movement of the ignited cartridge case provides the needed bolt movement, ejecting the spent case and stripping a fresh case from the magazine.
9x19 Parabellum
*May not represent an exhuastive list; Calibers may be model-specific dependent; Always consult official manufacturer sources.
25- or 40-round box magazine
Front and Rear

Material presented above is for historical and entertainment value and should not be construed as usable for hardware restoration, maintenance, or general operation - always consult official manufacturer sources for such information.

650 rpm
Muzzle Velocity
1,300 ft/sec / 396 m/sec

PA3(DM) - Original Production Model Designation; fixed plastic buttstock; 9mm cartridge; single-shot or full-automatic fire modes.
FMK-3 Mod 2 - Follow-Up Variant sporting sliding wireframe butt.
FMK-5 Mod 2 - Carbine form; 9mm cartridge; single-shot or semi-automatic fire modes.

Military lapel ribbon for the American Civil War
Military lapel ribbon for pioneering aircraft
Military lapel ribbon for the Cold War
Military lapel ribbon for the Korean War
Military lapel ribbon representing modern aircraft
Military lapel ribbon representing special forces
Military lapel ribbon for the Ukranian-Russian War
Military lapel ribbon for the Vietnam War
Military lapel ribbon for the World War 1
Military lapel ribbon for the World War 2


1 / 1
Image of the PA3(DM) / FMK-3 Mod 2
Left side view of the FMK-3 Mod 2 SMG; note collapsed wireframe stock and pistol-grip safety

Disclaimer | Privacy Policy | Cookies

2024 Military Pay Chart Military Ranks DoD Dictionary Conversion Calculators Military Alphabet Code Military Map Symbols

The "Military Factory" name and MilitaryFactory.com logo are registered ® U.S. trademarks protected by all applicable domestic and international intellectual property laws. All written content, illustrations, and photography are unique to this website (unless where indicated) and not for reuse/reproduction in any form. Material presented throughout this website is for historical and entertainment value only and should not to be construed as usable for hardware restoration, maintenance, or general operation. We do not sell any of the items showcased on this site. Please direct all other inquiries to militaryfactory AT gmail.com. No A.I. was used in the generation of this content; site is 100% curated by humans.

Part of a network of sites that includes GlobalFirepower, a data-driven property used in ranking the top military powers of the world, WDMMA.org (World Directory of Modern Military Aircraft), WDMMW.org (World Directory of Modern Military Warships), SR71blackbird.org, detailing the history of the world's most iconic spyplane, and MilitaryRibbons.info, cataloguing military medals and ribbons. Special Interest: RailRoad Junction, the locomotive encyclopedia.

©2023 www.MilitaryFactory.com • All Rights Reserved • Content ©2003-2023 (20yrs)