Aviation & Aerospace - Airpower 2024 - Aircraft by Country - Aircraft Manufacturers Vehicles & Artillery - Armor 2024 - Armor by Country - Armor Manufacturers Infantry Small Arms - Warfighter 2024 - Small Arms by Country - Arms Manufacturers Warships & Submarines - Navies 2024 - Ships by Country - Shipbuilders U.S. Military Pay 2024 Military Ranks Special Forces by Country

Welrod (Assassin's Pistol)

Bolt-Action Silenced Pistol

United Kingdom | 1939

"The Welrod appeared in World War 2 for use by special forces and resistance elements."

Authored By: Staff Writer | Last Edited: 11/02/2016 | Content ©www.MilitaryFactory.com | The following text is exclusive to this site; No A.I. was used in the generation of this content.
The Welrod was designed in the early part of World War 2 after a very short development period by the British War Office. The system was a silenced assassin's pistol, meant for close-up execution of predetermined high-value targets or unsuspecting sentries. Design of the pistol was credited to British Major Hugh Reeves (for a time known covertly as "Major Dolphin") who served with the Station IX research facility of the British Special Operations Executive (SOE) during World War 2. As such, many of these products were developed under the highest levels of secrecy to not offer the enemy any known advantages. As such, all production Welrods were completed without any identifiable manufacturer markings consistent with other weapons, instead affixed with a serial number by British government authorities receipt of the weapon. The Birmingham Small Arms Company (BSA) was a known producer of Welrods and some 2,800 were ultimately delivered for use by elements of the SOE, the American Office of Strategic Services (OSS) - forerunner of the modern-day Central Intelligence Agency - and resistance fighters, particularly those acting in Nazi-held Denmark. Amazingly, the Welrod maintained a rather quiet existence over the decades since the end of World War 2, used once again in British actions concerning the Falklands War, in rumored clandestine work in volatile Northern Ireland and in the 1991 Gulf War. It is thought that the Welrod also made an operational appearance in the Korean War and Vietnam War to an extent.

The Welrod was of a basic external design, appearing as nothing more than a relatively featureless steel cylinder fitting a vertical handgrip/magazine well with an integrated single-stage trigger and protective trigger ring. The cylinder measured in at 12 inches in length and was the heart of the weapon. Its shape was specifically designed to catch, and slowly disperse, the resultant gasses from a successful firing. This maintained all outgoing ammunition at subsonic levels and produced a sound pressure level of 73B, helping a given assassin maintain his/her covert status. The center compartment of the cylinder housed an expansion chamber while the major working components were held in the aft portion, this accounting for the bolt-mechanism, firing pin and the loading system. As a bolt-action weapon, the Welrod depended upon the user to manually operate the rear-set knob in order to cycle a new cartridge into the chamber making her a single-shot firearm. The knob was turned a quarter to the left and pulled, ejecting any cartridge in the chamber. Pushing the knob forward introduced a new cartridge from the magazine and delivered it into the chamber. During this action, the firing pin was cocked. A quarter turn to the right and the weapon was fully loaded and ready to fire. A basic safety mechanism was fitted to the weapon at the rear though this was the single safety the weapon maintained. Rudimentary front and rear iron sights were provided for ranged accuracy though the Welrod was designed from the outset for its short-range prowess - its cut-off muzzle made especially for pressing up against human targets. Effective range is thought to be out to 50 feet at best. The forward sight was actually set about midway across the top of the weapon. The cartridge ejection port was set directly above the magazine. Empty weight was approximately 2.65lbs (1.2kg).

Two versions of the Welrod were ultimately produced, these differing only in their caliber. One was designed for use with the 9mm Para cartridge while the other for the .32 ACP cartridge. Depending on the caliber model, the weapon could hold six (9mm) or eight (.32) rounds of ammunition in a single-stacked magazine column. The magazine effectively made up the pistol grip so, for improved portability, the component could be detached from the cylinder receiver (via a release under the trigger found inside of the trigger ring) and carried about in a pair of compact pieces. Once at a target area, the two components could once again be assembled to form the complete functional Welrod.

Incidentally, the interesting "Welrod" name comes from the designation system adopted by all of Station IXs clandestine products. As Station IX was based in Welwyn, all of its developments took on the first three letters within their product names - "WEL-rod". The Welrod can also be known under its more descriptive moniker, the "Assassin's Pistol".

Content ©MilitaryFactory.com; No Reproduction Permitted.
The physical qualities of the Welrod (Assassin's Pistol). Information presented is strictly for general reference and should not be misconstrued as useful for hardware restoration or operation.
370 mm
14.57 in
O/A Length
304 mm
11.97 in
Barrel Length
2.65 lb
1.20 kg
Bolt-Action, Manually-Operated Rotating Bolt
9mm Para; .32 ACP
6-rounds (9mm); 8-rounds (.32)
Forward and Rear Iron Sights
Performance specifications presented assume optimal operating conditions for the Welrod (Assassin's Pistol). Information presented is strictly for general reference and should not be misconstrued as useful for hardware restoration or operation.
40 ft
12.2 m | 13.3 yds
Notable series variants as part of the Welrod (Assassin's Pistol) Bolt-Action Silenced Pistol family line.
Welrod - Base Production Series Designation; some 2,800 examples believed produced; produced in 6-shot 9mm PARA and 8-shot .32 ACP forms.
Global customers who have evaluated and/or operated the Welrod (Assassin's Pistol). Nations are displayed by flag, each linked to their respective national small arms listing.

Contractor(s): Birmingham Small Arms Company (BSA) - UK
National flag of Denmark National flag of the United Kingdom National flag of the United States

[ United Kingdom; United States; Denmark ]
1 / 1
Image of the Welrod (Assassin's Pistol)
Two views of the Welrod silenced pistol; upper image showcases open bolt; note magazine acting as grip

Design Qualities
Some designs are single-minded in their approach while others offer a more versatile solution to requirements.
Some designs stand the test of time while others are doomed to never advance beyond the drawing board; let history be their judge.
Going Further...
The Welrod (Assassin's Pistol) Bolt-Action Silenced Pistol appears in the following collections:
Disclaimer | Privacy Policy | Cookies

2024 Military Pay Scale Military Ranks U.S. DoD Dictionary Conversion Calculators Military Alphabet Code Military Map Symbols US 5-Star Generals WW2 Weapons by Country

The "Military Factory" name and MilitaryFactory.com logo are registered ® U.S. trademarks protected by all applicable domestic and international intellectual property laws. All written content, illustrations, and photography are unique to this website (unless where indicated) and not for reuse/reproduction in any form. Material presented throughout this website is for historical and entertainment value only and should not to be construed as usable for hardware restoration, maintenance, or general operation. We do not sell any of the items showcased on this site. Please direct all other inquiries to militaryfactory AT gmail.com. No A.I. was used in the generation of this content.

Part of a network of sites that includes Global Firepower, WDMMA.org, WDMMW.org, and World War Next.

©2024 www.MilitaryFactory.com • All Rights Reserved • Content ©2003-2024 (21yrs)