PPS-42 / PPS-43

Submachine Gun (SMG) [ 1942 ]

The PPS-42 helped save the people of Leningrad while the PPS-43 became a cheaper production form of the successful submachine gun.

Authored By: Staff Writer | Last Edited: 08/15/2021 | Content ©www.MilitaryFactory.com | The following text is exclusive to this site.

Image copyright www.MilitaryFactory.com; No Reproduction Permitted.

VIEW SPECIFICATIONS [+]

The PPS submachine gun was designed by Leningrad engineer A. I. Sudayev in 1942. Leningrad was encircled by the might of the German Army to the south and the German-allied Finns to the north. Since Leningrad represented an industrial region for the Soviet Union, the city - with many thousands dying to starvation - was still producing its Red Army tanks and guns in their factories across the city.

The PPS-42 was developed with cost-effectiveness in mind, utilizing sheet metal stampings wherever possible. The resulting weapon proved simple to use and operate and became a staple submachine gun for the Red Army up through the end of the war (its use still continues in some form today). More importantly, the weapon was quick to produce and get to the frontlines, so much so in fact, that many-a-tank and infantry weapon were shipped straight from the factories into the hands of Soviet soldiers. The PPS was produced in two major variants - as the PPS-42 and PPS-43 - both detailed below.

The PPS-42 was born out of need during the siege. The designation reflected the initial year of production for the weapon (1942). Specifications for the PPS-42 stated a weight of 6.5lbs. The submachine gun featured an overall length of 35.7 inches with the stock extended and a length of 25.2 inches with the stock folded. The weapon was fitted with a barrel (right-hand, 4-grooved) length of 10.7 inches. Over 45,000 PPS-42 systems were produced before eventual replacement by the more economic and improved PPS-43 series. An effective rate-of-fire of 100 rounds-per-minute was possible along with a cyclic rate-of-fire of 600 rounds-per-minute. The weapon held an effective range out to 492 feet with a maximum range out to 656 feet.

The PPS-43 represented an improved and cheaper-to-produce form of the base PPS-42. As success always dictated production in a time of war, the PPS-42 was forged into the equally successful PPS-43. Mass production began in the middle of 1943 and the PPS-43 became a standard Soviet Army weapon throughout the rest of World War 2. Cost-cutting methods included the use of less machine operations in the production process, bringing the overall production cost of the weapon down substantially. Other major modifications included the shortening of the barrel and folding stock.

Specifications for the PPS-43 reflected a weight of 6.7lbs. The submachine gun features an overall length of 32.3 inches with the stock extended and a length of 24.2 inches with the stock folded. The weapon has a barrel (right-hand, 4-grooved) length of 9.6 inches. Like the PPS-42, the PPS-43 had an effective rate-of-fire of 100 rounds-per-minute was possible along with a cyclic rate-of-fire of 600 rounds-per-minute. The weapon held an effective range out to 492 feet with a maximum range out to 656 feet.

Both weapons fired the 7.62x25mm Tokarev cartridge - the same cartridge used in the Tokarev TT-30 (M1930) pistol. Fire operation was accomplished through automatic blowback with an open bolt. Both weapons also fired from the same curved 35-round detachable box magazine. Despite their similarities with the PPSh-41, neither of the PPS submachine guns were designed to accept the PPSh-41 magazines including its ammunition drum forms. The PPS-42 and PPS-43 models both featured a folding metal stock, which sat over the receiver and brought the overall length of the weapon down to a more compact manageable size. The magazine well was also extended from the body of the weapon to act as a makeshift foregrip for two-handed control. A distinct design feature of both PPS models was the forward position of the magazine, sitting a good distance away from the pistol grip and trigger group. A muzzle break and perforated heat shield were part of the integrated body components as were a pair of iron sights. The sights consisted of a forward-mounted fixed blade and a rear-fitted flip sight.

As can be expected with Soviet equipment achieving any level of success, the PPS series was produced in quantity throughout the Warsaw Pact as well as allied nations of the Soviet Union. The submachine gun was produced in China as the Type 54 and in Finland as the M/44. The M/44 served as the basis for the Spanish DUX-53 and DUX-59 submachine guns used in West Germany. Vietnam produced the submachine gun as the K-50M based on the Chinese Type 54. Poland produced the PPS-43 under license and also offered a modified form of the submachine gun as the PPS wz.43/52.©MilitaryFactory.com

Note: The above text is EXCLUSIVE to the site www.MilitaryFactory.com. It is the product of many hours of research and work made possible with the help of contributors, veterans, insiders, and topic specialists. If you happen upon this text anywhere else on the internet or in print, please let us know at MilitaryFactory AT gmail DOT com so that we may take appropriate action against the offender / offending site and continue to protect this original work.

Specifications

Service Year

1942

Origin

Soviet Union

Classification

Submachine Gun (SMG)

State Factories - Soviet Union

(View other Arms-Related Manufacturers)

Albania; Bulgaria; Czechoslovakia; Nazi Germany; East Germany; West Germany; Hungary; Iraq; North Korea; North Vietnam; Poland; Romania; Soviet Union; Russia; Vietnam

(OPERATORS list includes past, present, and future operators when applicable)

Overall Length

907 mm
35.71 in

Barrel Length

273 mm
10.75 in

Empty Wgt

6.50 lb
2.95 kg

Sights

Fixed Blade Front; Flip Rear.

Action

Blowback; Open Bolt

Blowback Operation
Gas pressure from the rearward movement of the ignited cartridge case provides the needed bolt movement, ejecting the spent case and stripping a fresh case from the magazine.

Open Bolt
System utilizes internal mechanism where bolt and associated working components are set to the rear of the receiver with no cartridge chambered; trigger actuation moves bolt forward, chambers cartridge, and fires bullet in single action - ultimately resetting during the complete cycle by way of the generated energy.

(Material presented above is for historical and entertainment value and should not be construed as usable for hardware restoration, maintenance, or general operation - always consult official manufacturer sources for such information)

Caliber(s)*

7.62x25mm Tokarev

Rounds / Feed

35-round detachable box magazine

*May not represent an exhuastive list; calibers are model-specific dependent, always consult official manufacturer sources.
**Graphics not to actual size; not all cartridges may be represented visually; graphics intended for general reference only.

Max Eff.Range

492 ft
(150 m | 164 yd)

Rate-of-Fire

600
rds/min

Muzzle Velocity

1,640 ft/sec
(500 m/sec)

PPS-42 - Chambered for 7.62x25mm Tokarev pistol cartridge; 35-round curved box magazine; muzzle brake and perforated heat shield; iron sights; metal folding stock.

PPS-43 - Modernized PPS-42 appearing in 1943; shortened barrel and stock; simplified stock locking mechanism; improved safety.

Type 54 - Chinese Production PPS

M/44 - Finnish Production PPS-43; 9x19mm Parabellum cartridge; box or drum magazines.

PPS wz. 43/52 - Poland development of modified PPS-43; fixed wooden buttstock with internal cleaning kit.

DUX-53 - Spanish copies of Finnish M/44.

DUX-59 - Spanish copies of Finnish M/44.

K-50M - Vietnamese submachine guns developed from the PPS.

M53 - Unsuccessful Hungarian version of the PPS-43 modified with bolt safety of the PPSh-41.

Military lapel ribbon for the American Civil War

Military lapel ribbon for pioneering aircraft

Military lapel ribbon for the Korean War

Military lapel ribbon representing modern aircraft

Military lapel ribbon for the Ukranian-Russian War

Military lapel ribbon for the Vietnam War

Military lapel ribbon for the World War 1

Military lapel ribbon for the World War 2

Ribbon graphics not necessarily indicative of actual historical campaign ribbons. Ribbons are clickable to their respective campaigns / operations.

Images Gallery

1 / 2

Image copyright www.MilitaryFactory.com; No Reproduction Permitted.

2 / 2

Image copyright www.MilitaryFactory.com; No Reproduction Permitted.

❮ ❯

Disclaimer | Privacy Policy | Cookies

2024 Military Pay Chart Military Ranks DoD Dictionary Conversion Calculators Military Alphabet Code Military Map Symbols

The "Military Factory" name and MilitaryFactory.com logo are registered ® U.S. trademarks protected by all applicable domestic and international intellectual property laws. All written content, illustrations, and photography are unique to this website (unless where indicated) and not for reuse/reproduction in any form. Material presented throughout this website is for historical and entertainment value only and should not to be construed as usable for hardware restoration, maintenance, or general operation. We do not sell any of the items showcased on this site. Please direct all other inquiries to militaryfactory AT gmail.com. No A.I. was used in the generation of this content; site is 100% curated by humans.

Part of a network of sites that includes GlobalFirepower, a data-driven property used in ranking the top military powers of the world, WDMMA.org (World Directory of Modern Military Aircraft), WDMMW.org (World Directory of Modern Military Warships), SR71blackbird.org, detailing the history of the world's most iconic spyplane, and MilitaryRibbons.info, cataloguing military medals and ribbons. Special Interest: RailRoad Junction, the locomotive encyclopedia.

©2023 www.MilitaryFactory.com • All Rights Reserved • Content ©2003-2023 (20yrs)