Aviation & Aerospace - Airpower 2024 - Aircraft by Country - Aircraft Manufacturers Vehicles & Artillery - Armor 2024 - Armor by Country - Armor Manufacturers Infantry Small Arms - Warfighter 2024 - Small Arms by Country - Arms Manufacturers Warships & Submarines - Navies 2024 - Ships by Country - Shipbuilders U.S. Military Pay 2024 Military Ranks Special Forces by Country

Benedetto Brin

Pre-Dreadnought Battleship

Italy | 1905

"The Italian Navy Benedetto Brin managed a short operational service life, lost to enemy sabotage during World War 1 on September 27th, 1915."

Authored By: Staff Writer | Last Edited: 04/14/2017 | Content ©www.MilitaryFactory.com | The following text is exclusive to this site; No A.I. was used in the generation of this content.
Italian naval engineer and future politician Benedetto Brin (1833-1898) spearheaded a vast resurgence in Italian naval prowess during the late 1800s. His early years were spent in engineering while, in 1873, he took a post as Undersecretary of State, working with Admiral Simone Arturo Saint-Bon - the then-acting Naval Minister of the Italian Navy. This period gave rise to several designs and, once in a position to do so, Brin helped to expand Italian shipbuilding prowess considerably. The Italian Navy could now depend on localized efforts to design, develop and produce the components needed to field successful surface warships on par with other world powers.

Brin lent his design talents to a warship that would eventually bear his name following his death - the "Benedetto Brin", a pre-dreadnought battleship of the Regina Margherita-class which included only the Regina Margherita herself. The design was conventional in most respects, with a single pole mast amidships centered between two smoke funnels, these themselves set aft of their respective main gun turret at the bow and stern positions. The Benedetto Brin was designed for open water operations and therefore attention was given towards achieving excellent speed over base protection. Her seaworthiness proved sound and her lack of armor was countered by a bevy of armament made of cannon and torpedo launchers.

Article Continues Below Advertisement...
The ship's construction was assigned to the Castellammare Naval Shipyard and had her keel laid down on January 30th, 1899. She was officially completed on September 1st, 1905 and formally launched on November 7th of that year. All told, she displaced at 13,400 tons under a standard load with 15,000 tons under full load. She showcased a bow-to-stern length of 455 feet with a beam reaching 78 feet, 3 inches and a draught of 29 feet, 6 inches. The battleship was powered by 28 x boilers feeding triple expansion steam engines to 2 x shafts at the stern for a combined 20,475 horsepower output. This allowed for a top ocean-going speed of approximately 20 knots (in ideal conditions) with an operational range out to 11,500 miles (10,000 nautical miles). She was crewed by 812 personnel as standard and this increased to 900 under a combat conditions. In terms of protection, the Benedetto Brin was served with a belt measuring 6 inches thick. Her decks were plated to 3.1 inches while turrets benefitted from 8 inches of armor protection. The conning tower and her casemates were each allotted up to 6 inches in armor protection.

Armament-wise, the Benedetto Brin could call upon her 2 x 2 305mm (12") /40 caliber main gun battery - two guns fitted to two turrets, one turret being fitted at the forecastle and the other towards the stern. These installations were backed by 4 x 203mm (8") /40 caliber guns in single turrets mounted about the superstructure as well as 12 x 152mm (6") /40 caliber guns in single turret mounts. 20 x 76mm (3") /40 caliber cannons were provided for short-ranged work while true close-range defense was through 2 x 47mm (1.9") /40 caliber and 2 x 37mm (1.5") /40 caliber guns. To counter surface threats at range, the Benedetto Brin fielded 4 x 450mm (17.7") torpedo tubes.

In 1911, the Benedetto Brin was deployed off of the coast of Tripoli before entering the Aegean in 1912. She would, however, meet an inglorious end in World War 1 due to an onboard explosion. Despite originally finding herself as part of the Triple Alliance that included Imperial Germany and the Austro-Hungarian Empire, Italy denounced its allegiance before siding with the Allied cause on May 23rd, 1915. Her service to the allies was short-lived when , on September 27th, 1915 - the Benedetto Brin was rocked by an onboard explosion that rendered the vessel a complete loss to the Italian effort. The culprits were thought to be Austrian sabotuers though some sources claimed an accidental explosion caused by an unstable supply of cordite. In any case, the blast was devastating enough to destroy the vessel where she lay and kill 454 of her crew leaving only 387 survivors. Such ended the reign of the Benedetto Brin and her exploits in The Great War. Her sister - the Regina Margherita - fared no better, she being lost to German U-boat naval mines on December 11th, 1916 to which 675 of her crew were lost and 270 survived.

The loss of both ships meant an end to the Regina Margherita-class as a whole.

Content ©MilitaryFactory.com; No Reproduction Permitted.
Power & Performance
Those special qualities that separate one sea-going vessel design from another. Performance specifications presented assume optimal operating conditions for Benedetto Brin.
28 x boilers with 2 x Triple expansion engines driving 2 x shafts.
20.0 kts
23.0 mph
Surface Speed
9,719 nm
11,184 miles | 17,999 km
The bow-to-stern, port-to-starboard physical qualities of Benedetto Brin.
450.0 ft
137.16 meters
O/A Length
78.0 ft
23.77 meters
29.0 ft
8.84 meters
Available supported armament and special-mission equipment featured in the design of Benedetto Brin.
4 x 12-inch (305mm) /40 guns
4 x 8-inch (203mm) /40 guns
12 x 6-inch (152mm) /40 guns
20 x 3-inch (76mm) /40 guns
2 x 1.9-inch (47mm) /40 guns
2 x 1.5-inch (37mm) /40 guns
Ships-in-Class (2)
Notable series variants as part of the Benedetto Brin family line as relating to the Regina Margherita-class group.
Regina Margherita; Benedetto Brin
Global operator(s) of the Benedetto Brin. Nations are displayed by flag, each linked to their respective national naval warfare listing.
National flag of Italy

[ Italy ]
1 / 1
Image of the Benedetto Brin

Mission Roles
Some designs are single-minded in their approach while others offer a more versatile solution to seaborne requirements.
Some designs stand the test of time while others are doomed to never advance beyond the drawing board; let history be their judge.
Going Further...
Benedetto Brin Pre-Dreadnought Battleship appears in the following collections:
Disclaimer | Privacy Policy | Cookies

2024 Military Pay Scale Military Ranks U.S. DoD Dictionary Conversion Calculators Military Alphabet Code Military Map Symbols US 5-Star Generals WW2 Weapons by Country

The "Military Factory" name and MilitaryFactory.com logo are registered ® U.S. trademarks protected by all applicable domestic and international intellectual property laws. All written content, illustrations, and photography are unique to this website (unless where indicated) and not for reuse/reproduction in any form. Material presented throughout this website is for historical and entertainment value only and should not to be construed as usable for hardware restoration, maintenance, or general operation. We do not sell any of the items showcased on this site. Please direct all other inquiries to militaryfactory AT gmail.com. No A.I. was used in the generation of this content.

Part of a network of sites that includes Global Firepower, WDMMA.org, WDMMW.org, and World War Next.

©2024 www.MilitaryFactory.com • All Rights Reserved • Content ©2003-2024 (21yrs)