Curtiss-Wright XP-55 Ascender

Single-Seat, Single-Engine Pursuit Fighter Prototype [ 1943 ]

The Curtiss XP-55 Ascender fighter project was a novel attempt at a pusher-prop aircraft design, though hampered by less-then-stellar performance.

Authored By: Staff Writer | Last Edited: 05/21/2018 | Content ©www.MilitaryFactory.com | The following text is exclusive to this site.

GO TO SPECIFICATIONS [+]

Advertisements

The XP-55 Ascender was an unorthodox attempt by the Curtiss-Wright company that produced just three prototype models. Answering a United States Army Air Corps call for unconventional aircraft designs, the XP-55 fit the bill with its pusher engine mounted at rear, swept-back wings and forward canard mountings. Less-then-stellar flight testing results and mechanical delays with the expected powerplant would eventually doom the project and leave two surviving prototypes (one would later be lost at an air show).

The XP-55 was a single-seat single-engine design. The pusher-type engine was mounted to the extreme rear and differed from traditional pull designs with the engine mounted at front. This left the pilot with a commanding forward view. Wings were highly swept which was another departure from the straight wing designs that continued on in jet fighter developments well into the Korean War. First drawings and scale models were completed and assessed as early as 1940 to which the Army Air Corps needed more convincing. As a result, Curtiss took it upon itself to produce a flyable full scale model - this one to be designated in-house as the CW-24B. The test aircraft differed some from the final three prototypes developed from the granted contract of 1942. The test bed flew with a Menasco C68-5 powerplant, whereas the final prototype models were fitted each with the Allison V-1710 engine. Initially, the XP-55 was to utilize an entirely new engine design in the form of a Pratt & Whitney design known as the X-1800. But developmental issues with the powerplant forced Curtiss to use an existing - yet proven - model instead.

Armament for the XP-55 was originally drawn up to include a pair of 20mm cannon to go along with twin 12.7mm (.50 caliber) machine guns. This arrangement was revisited and revised to a quad .50 caliber array during the testing phase and this standard armament stayed with the life of the program. The design offered up benefits in this way in that the armament could be fully fitted into the nose assembly, seeing it that the engine was now mounted behind the cockpit seating area, opening up the nose to more spacious armament. Firepower could also be more concentrated in this fashion as opposed to a combination of wing and nose-mounted armament.

The XP-55 would go on to feature a host of interesting design elements. For Curtiss, it would become its first design to feature a powered tricycle landing gear assembly (though fixed on the initial test models). The absence of a true rudder resulted in smaller vertical surfaces mounted far off onto the wings. The use of forward canards was also revolutionary as was the ejection system - the propeller had to be jettisoned before the pilot could eject himself, ensuring the pilot would not eject and hit the spinning propeller system at rear by accident. It should be noted that designs similar to this were also being trialed by the Japanese (in the J7W1 Shinden) and Germans (in the Henschel P.75) during the Second World War and was by no means unique to American aircraft design efforts.

The final verdict on the XP-55 rang in hard when it was realized that the system could not match the performance available to contemporary and traditionally-designed fighters. Additionally, the latter years of the Second World War were already bringing about the advent of jet-propulsion effectively negating any more development or advances in propeller systems research. As such, the series was limited in production totals and became the stuff for aviation aficionados and museum buffs.©MilitaryFactory.com

Note: The above text is EXCLUSIVE to the site www.MilitaryFactory.com. It is the product of many hours of research and work made possible with the help of contributors, veterans, insiders, and topic specialists. If you happen upon this text anywhere else on the internet or in print, please let us know at MilitaryFactory AT gmail DOT com so that we may take appropriate action against the offender / offending site and continue to protect this original work.

Specifications

Service Year

1943

Origin

United States

Status

CANCELLED
Development Ended.

Crew

1

Production

3
UNITS

Curtiss-Wright - USA

(View other Aviaton-Related Manufacturers)

United States (cancelled)

(OPERATORS list includes past, present, and future operators when applicable)

✓ Air-to-Air Combat, Fighter
General ability to actively engage other aircraft of similar form and function, typically through guns, missiles, and/or aerial rockets.

✓ X-Plane (Developmental, Prototype, Technology Demonstrator)
Aircraft developed for the role of prototyping, technology demonstration, or research / data collection.

Length

29.5 ft
(9.00 m)

Width/Span

40.7 ft
(12.40 m)

Height

9.8 ft
(3.00 m)

Empty Wgt

6,354 lb
(2,882 kg)

MTOW

7,716 lb
(3,500 kg)

Wgt Diff

+1,362 lb
(+618 kg)

(Showcased structural values pertain to the base Curtiss-Wright XP-55 Ascender production variant)

Installed: 1 x Allison V-1710-95 liquid-cooled V12 engine developing 1,275 horsepower driving a three-bladed propeller unit in pusher arrangement.

Max Speed

390 mph
(628 kph | 339 kts)

Ceiling

34,449 ft
(10,500 m | 7 mi)

Rate-of-Climb

2,350 ft/min
(716 m/min)

♦ MACH Regime (Sonic)

Sub

Trans

Super

Hyper

HiHyper

ReEntry

♦

(Showcased performance specifications pertain to the base Curtiss-Wright XP-55 Ascender production variant. Performance specifications showcased above are subject to environmental factors as well as aircraft configuration. Estimates are made when Real Data not available. Compare this aircraft entry against any other in our database or View aircraft by powerplant type)

PROPOSED:
2 x 20mm automatic cannons in nose.
2 x 0.50 caliber (12.7mm) heavy machine guns in nose.

ACTUAL:
4 x 0.50 caliber (12.7mm) heavy machine guns in nose.

Supported Types

Graphical image of an aircraft medium machine gun

Graphical image of an aircraft heavy machine gun

Graphical image of an aircraft automatic cannon

(Not all ordnance types may be represented in the showcase above)

Hardpoint Mountings: 0

XP-55 - Reserved Model Series Designation; produced in three prototype examples in the s/n 42-78845, s/n 42-78846 and the s/n 42-78847.

CW-24B - Designation as applied to by the Curtiss company to a full working model of the XP-55.

P-55 - Reserved Production Model Designation

Military lapel ribbon for Operation Allied Force

Military lapel ribbon for the Arab-Israeli War

Military lapel ribbon for the Battle of Britain

Military lapel ribbon for the Battle of Midway

Military lapel ribbon for the Berlin Airlift

Military lapel ribbon for the Cuban Missile Crisis

Military lapel ribbon for pioneering aircraft

Military lapel ribbon for the Falklands War

Military lapel ribbon for the French-Indochina War

Military lapel ribbon for the Golden Age of Flight

Military lapel ribbon for the 1991 Gulf War

Military lapel ribbon for the Indo-Pak Wars

Military lapel ribbon for the Iran-Iraq War

Military lapel ribbon for the Korean War

Military lapel ribbon for the 1982 Lebanon War

Military lapel ribbon for the Malayan Emergency

Military lapel ribbon representing modern aircraft

Military lapel ribbon for the attack on Pearl Harbor

Military lapel ribbon for the Six Day War

Military lapel ribbon for the Soviet-Afghan War

Military lapel ribbon for the Spanish Civil War

Military lapel ribbon for the Suez Crisis

Military lapel ribbon for the Ukranian-Russian War

Military lapel ribbon for the Vietnam War

Military lapel ribbon for Warsaw Pact of the Cold War-era

Military lapel ribbon for the WASP (WW2)

Military lapel ribbon for the World War 1

Military lapel ribbon for the World War 2

Military lapel ribbon for the Yom Kippur War

Military lapel ribbon for experimental x-plane aircraft

Ribbon graphics not necessarily indicative of actual historical campaign ribbons. Ribbons are clickable to their respective aerial campaigns / operations / aviation periods.

Images Gallery

1 / 3

Image of the Curtiss-Wright XP-55 Ascender

Left side profile illustration view of the Curtiss XP-55 Ascender fighter; color

2 / 3

High-angled left side view of the Curtiss XP-55 Ascender in flight

3 / 3

Left side profile view of the Curtiss XP-55 Ascender at rest

❮ ❯